Having problems with your furnace of late? When it comes to furnace repair Pueblo, there are many companies to choose from. However, it may be best for you to identify the problem before calling out a technician. This way, you can help them pinpoint what the root cause is, and also save you additional time as well. Here are a few common problems that generally arise for furnaces.
Dirty Air Filter
Image courtesy of Storyblocks.
One of the most common problems one can face when it comes to furnaces is a dirty air filter. A dirty or clogged air filter can make the furnace have to work harder to circulate air. This can lead to further problems, such as the limit switch that controls the fan. The furnace itself can shut off if the filter is too clogged. That’s why it’s important to check the air filters first. If it is especially dirty it may be advisable to contact a professional to check the furnace. It’s best to be sure that nothing else is wrong or could cause safety issues later on down the road.
Thermostat Issues
You can trace most issues regarding furnaces back to the thermostat. Especially if it is a programmable electronic one. If the thermostat is not set correctly, the furnace may not work. For instance, you may have forgotten to program it after a season has ended. You might no longer need it to maintain a certain temperature. Luckily, it only takes a matter of seconds to check the temperature setting on the thermostat. This could be the simple problem that is causing the furnace not to work at all.
Circuit Breaker Issues
Do you find that the furnace is not working after the electricity has gone out? Perhaps someone tripped the circuit breaker by accident, thus shutting it off? If so, it may be useful to verify that the circuit breaker to the furnace has not tripped. This can easily arise if someone hasn’t labelled it correctly and is a simple fix.
Noise Issues
If the furnace seems more noisy than usual, it may be a mechanical problem. This is especially likely if the noise sounds like rumbling or squeaking. If the problem is mechanical in nature, it’s best to have a professional tackle the issue. These kinds of problems are hard to fix without experience and training. When it comes to furnace repair Pueblo, you can rest assured that professionals will get the job done right the first time. This is because they know exactly what they need to fix and how to do it.
What should you do next?
If you do want to consider furnace repair Pueblo services, there’s a six step process. Follow the advice below and you’ll have your issue solved in no time.
1. Set up an appointment
The first step of the furnace repair process is to schedule an appointment. A technician from your company of choice will come to your home personally. This is a seamless process that takes little to no time at all to do.
2. Initial discussion
After the appointment is set, the technician will arrive for your appointment. Firstly, they will have an initial discussion with you to figure out what sort of problems you are having with the furnace. They’ll also ask for any other information that may be of use, such as the age of the home and so forth.
3. Diagnostic check
After having the initial discussion the technician will then perform a diagnostic check of the furnace. This will allow them to pinpoint what the root cause of the problem is. Once they know this, it’s simply a case of fixing it!
4. Recommendations and pricing
After conducting the diagnostic check, the technician will know what the problems are. They will then provide you with service recommendations. They’ll explain what action they need to take, what parts they require and so forth. Importantly, you do not have to make a decision right then and there. In fact, we recommend that you get service recommendations from at least two other companies. This will ensure that they are all identifying the same problem. You want to make sure that the first company didn’t miss anything! You’ll also be able to compare prices so that you can get the best deal possible.
5. Repair
Once you have found the right company, the technician will then come back to complete the repair. They should carry it out in an efficient manner, with all of the parts and tools available to the technician. They shouldn’t have to go back and forth to their company’s location to retrieve parts or tools.
6. Follow up
The final step! Once the technician has finished the repair, the furnace should be working again. Afterwards, most companies will follow up with you to make sure you are happy with the work performed. They’ll make sure everything is running smoothly and that there are no problems. This is a good time to be honest and let them know how you really felt about the entire process. If they don’t know what they are doing wrong, how can they improve their service? They do this because they truly want to meet and exceed expectations. If anything they will be appreciative of the feedback.
